Dining tables

Given that a dining room table is typically a ‘once in a lifetime’ purchase these tables are produced to order, so unless specified they would not be in stock. This allows you to be specific about the style of dining room table that you require as well as the dimensions and finish. You may want to incorporate features from the different styles shown here but bear in mind that certain materials may need to be sourced for the more specialist tables.

Below is a selection of dining room table styles that we can produce. There is also a gallery of photos.

 

Farmhouse style kitchen table
£600

Purchase

Description

Large farmhouse style kitchen table with a top made from reclaimed pine boards and old joists for legs.  This particular table was designed to sit 10, however it could be made to any length.  The legs are recessed in from the ends to allow a person to sit at each end.

The short ends of the table top have been capped to minimise wood movement.

This table has been finished in an acrylic varnish which protects the surface whilst keeping the original colour of the wood.

The legs will come off this table (by undoing the coach bolts) to allow for transportation and storage.

Dimensions

•Length 210cm
•Height 75cm
•Depth 88cm

Price: £600 (based on the above dimensions)

Click here for more photographs.


 

Waney edge dining room table

 

Waney edge dining table
£620 – 1 in stock

Purchase

Description

Dining room table made with reclaimed scaffold board top, larch frame (ex road building boarding) and oak legs which are from a beam that came from a 200yr old Welsh barn.

The top of this table has been cut to a ‘waney’ edge and finished with Danish oil.  It will comfortably seat 6 people.

This table doesn’t flat pack.

Dimensions

•Length 150cm
•Height 74cm
•Depth 80cm

Price: £620 (based on the above dimensions)

Click here for more photographs.


 

Pine dining table
£480

Order

Description

Pine dining room table made from reclaimed scaffold boards with pine posts for legs which have the frame mortised into them.

This example has straight edges, loads of room for your legs and will comfortably seat 6 people.

The example in the photos was part of a set of two tables and four benches commissioned for an office in Bristol.

Dimensions

•Length 150cm
•Height 75cm
•Depth 86cm

Price: £480

Click here for more photographs.


Related product:


Pine dining table bench made from reclaimed wood

 

 

Pine dining table bench
£110

Order

Description

Wooden bench made entirely from reclaimed boards.

The wood used in the bench is around 3.5cm thick, giving a very chunky appearance.  The depth of the seat is a generous 33cm, however this could be made deeper if required.

I have sanded the wood to a fine finish and protected it with several coats of Danish oil to protect and enhance the natural grain and signs of distress within the wood, this is a hardwearing finish that can be wiped clean after spillages etc, so it is very family friendly!   Feel free to let me know if you want yours left bare.

Dimensions

•Length 150cm
•Height 46cm
•Depth 33cm

Price: £110 (for a 150cm bench)